Series PHD/Pendant Hand-held with E-Stop/Enable SW for CNC Panels
Specification Drawings Ordering Information Detailed Information[PDF]


US $510.00
S.R.P.
List Price

 

 

 

 

 

 

 


brand

FEATURES

  • Hand-held Pulse Generator for "manual" axis jog
  • Differential Line Driver Output
  • X, Y Z Selector switch plus 4, 5, 6 axis
  • Retro Fit applications for Machining Center
  • "Handy," "Lightweight," "Very Thin"
  • Standard Emergency Stop Button
  • Standard 16 ft. extended spiral cable
  • Std. Magnets attached in rear
 Specification

Electrical
Outputs Line Driver
TTL voltage output for FANUC
Pulse per Revolution
100 PPR
Supply Voltage 5v ± 0.25v dc
5v ± 0.25v dc
Output Voltage (VH) > 2.5 v
> 4.0 v
Output Voltage (VL) < 0.5 v
< 0.5 v
Current Requirement < 60mA (No loading)
Sink Current < 20mA
Output Capacity Sync.Current : 20mA, Residual Voltage : < 0.5v
Phase Difference Quadrature Square Wave A & B : 90°±45° (T/4 ±T/8)
Rise/Fall time < 2µs
Frequency Response 0-10 kHz
Insulation Resistance 20 MΩ At 500v dc Megger (Circuit-Body)

Mechanical
Dial Rotating Speed 500 r/min.- Max., 200 r/min.-Normal (Continuous)
Starting Torque 8.34 ozf-in (600 gf-cm) at 25°C
Rotational Life 10 x 6 bits turns at < 200 rpm
Weight 3 lbs. (1.5 kg.)

Environmental
Operating Temperature 0 to 60 °C
Humidity RH 35% to 90% no condensation
Storage Temperature 0 to 80 °C
Vibration 10-50 Hz/ 1.5mm X, Y, Z- 2 hrs. Each
Shock 50 G per 11 mms
Enclosure IP-64 / NEMA 4

Rotary Switch
Max. Voltage 30 v dc
Current / Switch Life 50mA / >25,000 cycles

Emergency Stop Switch
DC Load Resistance 30 vdc, 1.0A

Enable Switch
DC Load Resistance 50 vdc, 100mA